Technical question

Road sign of question on are bollard with an electronic label endlessly scrolling text TECH.

Written by

in

First I would say something not related to post contents. This time I decided to not use an AI generation or search for a stock photo, but draw a simple sketch as an illustration.

Road sign of question on are  bollard with an electronic label endlessly scrolling text TECH.
Drawing shows a road sign of question on a bollard with an electronic label endlessly scrolling text TECH. Font of text is too big so label looks too narrow for the shown text. There is some road with a curb in front of it and a grass growing around and behind the bollard.

After experiencing what happens if you setup the Chatmail relay on same domain where I have the normal email, I wondering about something like what Yunohost does, when there is some fancy admin UI to configure all this, add and remove accounts there without command line or with dedicated commands set like “accounts add username” but with latest Chatmail and matrix server with shared accounts space?

I understand that these protocols are completely different, I just want to be sure I can share addresses like

magical_cat@stove.legends.house // for chatmail & DeltaChat but not "default email" like site registrations or e-commerce websites/shops.
magical_cat:stove.legends.house // for Matrix & Element
@magical_cat@stove.legends.house // for ActivityPub direct messages

with option to share these identifiers and links here at blog.

Ideally it would be nice also have something like

@magical_cat@cinema.legends.house //for videos shared on activity pub from PeerTube

You can say that easiest way to have that is to use the yunohost and install these apps on separate subdomains but I want to either reuse domain where possible, or use the latest codebase of these programs. And I want to set it up in following way:

  1. For such account it should have some kind of profile data synhronized across apps and managed at single place, ideally some backend page.
  2. If I would specify some email address like magical_cat@legends.house for such account, software should send the notifcations there, let it be password reset or notification about direct message/comment.
  3. Ideally it should work like shared accounts provider for all these apps, keeping accounts info including email, username (and optionally password? But this is not mandatory thing) in sync across apps.

You would say I should just use Yunohost, but I want to get it working such way using the latest software versions of e. g. chatmail relay and matrix, and ideally – briar relay.

To be honest this all looks like mutually exclusive requirements of using latest versions and shared accounts list, and the expectation it would work on shared domain is something that is beyond capabilities of today tech. May be I would be able to use chatmail and one other messeging protocol on same domain but only because it would use email ports. If chatmail and matrix relay will have to live on different domains, I would have to be creative in these subdomains to keep it fun, like mailbox for chatmail, stove for matrix relay, closet for briar relay and cinema for PeerTube and so on, but keeping this blog on root domain of legends.house and managed WordPress service of Hostinger.

Who else had setup like that with or without Yunohost on same VPS, with or without container manager?

PS: special feedback I like to hear about idea to use a sketch drawn by hand in few minutes as the illustration for blog post, and this illustration as example of such tactic.

PS: I am not making a choice between DeltaChat & Matrix, not because I want avoid some holywar between these protocols, but because I want to try to use both where appropriate. I not have too much of contacts, so may be it is about getting experience of setting it up, mostly.

Fediverse Reactions

Comments

15 responses to “Technical question”

  1. Magical Cat Avatar

    Drawing a sketch to be used as an illustration for a blog post was a fun experience. it is better than searching for stock image or (Veles forbid this) use an AI slop generator.
    And, in reality… It takes not much more time. Quite comparable.
    How it looks you can see here: https://legends.house/technical-question/
    #Tech #noAI #noAISlop #noSlop #no_ai_slop

    1. Matthew Avatar

      @koteisaev that is actually very good. and i would definitely rather see your own drawing than anything generated. plus, because drawing is a skill, every time you make one, you will get better at all future ones.

      1
      1. magical_cat Avatar

        Thanks a lot! I actually suprised a lot how good it went. May be I will need to find a beter way to take photo of sketch, as this one a bit too dark.
        Do you have any ideas or suggestions about the question the original post is about?

        1. Matthew Avatar

          @magical_cat sorry i keep getting distracted! unfortunately i am not familiar enough with these platforms to offer any suggestions, but i boosted it in case that helps anybody find it. i do one day want to set up chatmail but i have not had energy to properly understand the documentation yet.

          1. magical_cat Avatar

            For me it is more about setting it up in a way it would avoid things that happened with this blog at first. I tried to set it up using a VPS with containers manager/docker manager, but as it is publicly available thing, I guess AI bots made too much requests sometimes and it caused resources overconsumption. Raw WordPress or some plugins I use is not friendly to traffic spikes and it caused VPS resources overconsumption. So I switched blog to dedicated service Hostinger provides. But now I may try to use VPS for different stuff – chatmail relay or matrix server. But I don’t know how it will go and where it will end, yet.

    2. Djembro, RO, supports πŸ‡ΊπŸ‡¦πŸ‡¬πŸ‡ͺ Avatar

      @koteisaev @magical_cat

      It is indeed a good sketch.

      1
      1. magical_cat Avatar

        Thanks! It feels very good to do something literally first time and see such feedback.

  2. Djembro, RO, supports πŸ‡ΊπŸ‡¦πŸ‡¬πŸ‡ͺ Avatar

    @magical_cat

    Lately I’ve been getting this message when I try to read your full article:

    This site can't be reached
    legends.house took too long to respond.

    My phone is otherwise working normally. I’m not having any other problems.

    I wonder if anyone else has an issue connecting to your site.

    1
    1. magical_cat Avatar

      Can you give a recent time when it happened? At least date?
      When I tried host wordpress in raw VPS, it often went beyond VPS resources and got disabled to prevent overconsumption. But It was few weeks or even months ago?
      Since moving to dedicated service, and after adding some of recent updates I guess it stopped to happen. If it happened recently again and I missed, I need more info on that to ask Hostinger what I can do with that.

      1. Djembro, RO, supports πŸ‡ΊπŸ‡¦πŸ‡¬πŸ‡ͺ Avatar

        @magical_cat

        Today and also the last time you posted. Does that help?

        1. magical_cat Avatar

          It helps in sense I was unaware the problem still persist. I works everytime I open the site lately.
          I surely will ask question or two to the Hostinger support.

        2. Lee from Colorado Avatar

          @djembro @magical_cat fwiw, I can access the post linked above just fine this morning.

          1. Djembro, RO, supports πŸ‡ΊπŸ‡¦πŸ‡¬πŸ‡ͺ Avatar

            @magical_cat
            Maybe something has happened to the site’s ability to accept connections from Kyiv.

            Btw I do use a VPN. The server is based in Kyiv. It doesn’t interfere with anything else I do. And I used to be able to access your site. When I have time, I’ll try turning it off.

          2. magical_cat Avatar

            Thanks for taking a look

      2. Djembro, RO, supports πŸ‡ΊπŸ‡¦πŸ‡¬πŸ‡ͺ Avatar

        @magical_cat

        Can you ask another follower if they can access your site?

        1. magical_cat Avatar

          Surely I will do so.

Likes

Reposts

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post’s permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post’s URL again. (Find out more about Webmentions.)